Filter
Top Products
9. Setting Up OpenLane for FrameSaver Device
9-4 December 2002 9700-A2-GB20-20
Ordering Advanced SLM Feature Set Activations
When advanced SLV functionality is needed at a site, an Activation Certificate
(Feature No. 9720-C1-220, 9783-C1-220, or 9788-C1-220) can be ordered, which
will allow you to activate Advanced SLM features in FrameSaver devices with the
Diagnostic Feature Set. You must have the OpenLane SLM system, Release 5.3
or later, to activate Advanced SLV capability in FrameSaver devices and to
manage your certificates.
NOTE:
If you have a combination of models in your network, a separate Activation
Certificate must be ordered for each model number. Each certificate can be
ordered for a single unit or for many units.
Contact one of the following to request an Activation Certificate:
If you are an end user and managing your own network, contact your sales
representative or distributor.
If your network service provider (NSP) manages the network, contact the
service provider.
If you are a network service provider or distributor, contact Paradyne at
1-800-727-2396, www.paradyne.com, via a purchase order, or your
Electronic Data Interchange (EDI). If submitting a purchase order by fax, send
it to 1-727-532-5270.
An Activation Certificate can also be ordered through the Paradyne store at
www.paradyne.com/store.
Provide the following information:
Model
Number of units to be activated
Your OpenLane SLM system license key number
To Find Your License Key Number
Your license key number was entered into your system when your OpenLane SLM
system was installed and is available from the OpenLane Administration screen.
However, to access the screen with your license key number, you must log in as a
user with Administrative system access.
Procedure
To find your OpenLane license key number:
1. Open the OpenLane SLM application and log in as a user with Administrative
access.
2. A bottom of the OpenLane Administration screen, select About OpenLane
SLM.
The license key is shown mid-screen, below the copyright and build
information.