5-4 SV61891 Rev. A
5 • Adding Postage
Follow the directions here to perform a modem refill on your control centre.
1. Press the
Refill key. Depending on how your system is set up, the
display may prompt you to enter your four-digit supervisor password.
If necessary, key in your password and press Enter. The normal
(default) refill amount displays.
2. Press
Enter to accept the normal refill amount; or key in the value you
want and press Enter. DO NOT enter a refill value more than $99,999.
Use whole dollars only; do not key in cents. The control centre
assumes two decimal places automatically. You don't have to key
in the decimal point.
3. If the system does not detect a phone line, it prompts you to connect
the phone cord. Press Enter after you've done so.
Performing a
Modem Refill
You can check your Postage By Phone
®
account balance at any time.
Your system must be connected to an analog phone line to do so.
NOTE: Whenever you check your Postage By Phone
®
account balance or add
postage to your meter (see Performing a Modem Refill), your system
automatically checks for updates, performs a rate or software update, and
performs a postal inspection.
1. Press the Refill key.
2. Key in $0.00.
3. Press
Enter. The system calls the Postage By Phone
®
Data Centre
and displays your account balance and any credit line available.
4. Press
CE/C to return to the Ready screen.
Checking Your
Postage By
Phone
®
Account
Balance