Filter
Top Products
SV61891 Rev. A 3-17
DM230L, DM330L, DM350L Operating Guide
Printing
Postage
Using Presets
Selecting the Normal Preset
The Normal Preset is the factory default setting which contains no
predetermined mail job settings (e.g., Postage Value, Class, or Weight).
Pressing the Normal Preset key will clear your current mail job settings
and take you back into Seal Only Mode. From here you can begin a new
transaction.
Selecting a Custom Preset
1. At the Ready screen on the IntelliLink
TM
Control Centre, press the
Custom Presets key. The display lists all presets. “EMPTY” means
no values are assigned to the preset.
2. Press the
Custom Presets key repeatedly until you see the preset
you want.
3. Press
Enter to select the preset. If the preset includes a
password-protected account, the display prompts you to enter the
four-digit password. The display then shows the custom preset values.
4. Print the envelope as described in Printing Postage on an Envelope
in
this chapter, or:
Print tapes as described in Printing Postage on Tape Strips (or Sheets)
in this chapter.
If you'd like to set up custom preset values or change them, see
Chapter 4.
3