Filter
Top Products
4-20 SV61891 Rev. A
4 • System Setup
Setting the
AutoClear
Function
Setting the
Clear Zone
Option
You can use the AutoClear option to have your system clear either the
class or the Zone whenever you place a new piece of mail on the scale.
1. Press the
Options key, then Setup Menu, then Basic Settings.
2. Press the
Options key again then select Scale/Rates Setup .
3. Select
AutoClear.
4. Select
AutoClear Class to clear the class.
Select
AutoClear Zone to clear the Zone.
Select
AutoClear Off to disable this option.
5. Once you make your selection, the displays shows the status of the
AutoClear option.
You can have your system clear the Zone whenever you enter a new class.
1. Press the
Options key, then Setup Menu, then Basic Settings.
2. Press the
Options key again then select Scale/Rates Setup .
3. Select
New Class - Clear Zone.
4. The display shows the status of the Clear Zone feature, On or OFF.
5. To change the current setting, press
Enter and the display shows the
new status.
If you do not want to change the status, press No (
Options key).