Filter
Top Products
SV61891 Rev. A 3-19
DM230L, DM330L, DM350L Operating Guide
Selecting a
Class or
Special
Service
Selectiong a class is a required action in order to generate the appropriate
rate for your mail piece. The procedure for setting a class special service
or carrier depends on whether you enter the weight of the mail manually or
use the interfaced scale to weigh your mail piece. Each class has its own
set of special services. When you select a class only those options available
for that selection appear in the display.
Your system automatically calculates the correct postage for your piece of
mail based on its weight and the class of service you select.
Before selecting a class or special feature, please note the following:
• The class that appears in the Ready screen is the one you last
selected.
• If you turn off and then turn on the power to your system, the
previously selected class automatically clears.
• If you place a piece of mail on the scale, or enter a weight manually,
the system automatically prompts you to select a new class if the new
weight requires a different class.
• If your system has an attached scale, we recommend that you turn
the AutoScale option ON. Refer to the Setting Up an Attached Scale
section in Chapter 4 of this guide.
• When you are done selecting the class and/or special service, print
the envelope as described in Printing Postage on an Envelope in this
chapter or print tapes as described in Printing Postage on Tape Strips
(or Sheets) in this chapter.
Before
Selecting or
Changing a
Class
5