Filter
Top Products
SV61891 Rev. A 7-9
DM230L, DM330L, DM350L Operating Guide
Printing Problems
Control Centre
Will Not Print
Control centre is in seal-only mode.
This mode disables printing. Press the CE/C to return to the postage mode
and resume printing.
Digital Indicia is
Incomplete or
Streaked, Poor
Print Quality
Print nozzles are clogged.
Perform a print test:
1. Press the
Options key twice.
2. Select Ink Functions
.
3. Select
Maintenance and follow the prompts.
If the test sample shows gaps, perform printer maintenance as prompted.
You can repeat this up to three times. See the instructions in
Maintaining the
Printer in Chapter 6.
If printer maintenance fails to correct the problem, call for service. You may
have to replace the printhead.
Example of poor / streaked indicia
Display Problems
Display is Hard
to Read
Display contrast needs adjustment
1. Press
Options.
2. Select
Setup Menu.
3. Select
Basic Settings.
4. Select
Display Contrast.
5. Select the contrast level you want: 1 is the darkest; five is the lightest.
6. Press
Enter.
7. Press
CE/C to return to the ready screen.