Filter
Top Products
3-6 SV61891 Rev. A
3 • Running Mail
1. Weigh Mail Piece – Place mail piece on the integrated weigh platform.
2. Select Class – Press the Class button and select Change Class
(option 1.) then select Lettermail and press Enter to confirm.
3. Select your desired Lettermail sub-class (e.g., Dom Standard, Dom
Other, USA, International) and then press
Enter to confirm.
4. Select any desired special services (e.g., Registration, Insurance
Coverage) by selecting the appropriate menu options. If no special
services are required press Enter.
5. The ready screen will now display the postage amount in the top right
hand corner of the system display, and the message “Ready to Print”
will appear.
NOTE: You cannot enter postage values manually into the mailing system
using the numeric keypad. All mailing transactions must be processed by a
combination of weight entry (integrated weight platform or manual entry) and
making a class selection. The internal rating feature calculates the accurate
postage for each mail job.
If you do not want to seal the envelope:
1. Hold the envelope by its bottom edge.
2. Place the envelope ADDRESS SIDE UP on the feed deck.
3. Push the envelope to the rear (A) so its top edge is up against the
back wall of the system.
Mail In a Minute
– Processing
a Letter Using
the Integrated
Weigh Platform