Filter
Top Products
RealPresence Collaboration Server 800s Administrator’s Guide
16-10 Polycom, Inc.
3 Modify the following fields:
4 Click the Routers tab.
With the exception of IP Network Type, the field definitions of the Routers tab are the
same as for the Default Management Network. For more information see page 16-4.
Table 16-6 Default IP Network Service – IP
Field Description
Network Service
Name
The name Default IP Service is assigned to the IP Network Service by
the Fast Configuration Wizard. This name can be changed.
Note: This field is displayed in all IP Signaling dialog boxes and can
contain character sets that use Unicode encoding.
IP Network Type Displays the network type selected during the First Entry
configuration. The Default IP Network icon indicates the selected
environment.
You can select:
• H.323: For an H.323-only Network Service.
• SIP: For a SIP-only Network Service.
• H.323 & SIP: For an integrated IP Service. Both H.323 and SIP
participants can connect to the MCU using this service.
Note: This field is displayed in all Default IP Service tabs.
Signaling Host IP
Address
On RealPresence Collaboration Server 800s this field is disabled as
only one IP address is used for signaling and media transmission.
Media Card 1
IP Address
Enter the address to be used by IP endpoints when dialing in to the
MCU.
Subnet Mask Enter the subnet mask of the MCU.
Default value: 255.255.255.0.