Filter
Top Products
RealPresence Collaboration Server 800s - Administrator’s Guide
F-4 Polycom, Inc.
Connecting to the Management Network
To connect directly to the Collaboration Server:
1 Connect one LAN cable between the PC and LAN 1 on the Collaboration Server’s back
panel.Connect the power cable and power the Collaboration Server On.
2 Start the Collaboration Server Web Client application on the workstation, by entering the
factory setting Management IP address in the browser’s address line and pressing Enter.
3 In the Collaboration Server Web Client Login screen, enter the default Username
(POLYCOM) and Password (POLYCOM) and click the Login button.
The Fast Configuration Wizard starts.
If no USB memory stick is detected and either: this is the First Time Power-up or the
Default IP Service has been deleted and the Collaboration Server has been reset, the
following dialog box is displayed:
For more information about First-time Power-up and the Fast Configuration Wizard see
the Polycom® RealPresence Collaboration Server 800s Getting Started Guide, "Procedure 1:
First-time Power-up” on page 2-8.
4 Enter the following parameters using the information supplied by your network
administrator:
— Control Unit IP Address
— Shelf Management IP Address
— Control Unit Subnet Mask
— Default Router IP Address
5 Click the Save & Close button.