Filter
Top Products
Psion Teklogix 9160 G2 Wireless Gateway User Manual 159
Chapter 15: Configuring VLANs
Updating Settings
15.3 Updating Settings
To update VLAN settings:
1. Navigate to the VLAN tab page.
2. Configure the VLAN settings as required.
3. Click the Update button to apply the changes.
Security Mode
Select the
Security Mode
for this VLAN. Select one of the following:
• None (Plain-text)
• Static WEP
• WPA Personal
Note: The Security mode you set here is specifically for this Virtual Network. Other
networks continue to use the security modes already configured:
• Your original Internal network (configured on the Ethernet Settings page) uses the
Security mode set on Security.
• If a Guest network is configured, always set the security mode to “None”.
Field Description
Table 15.1 Virtual Wireless Network Settings