Filter
Top Products
Chapter 22: The 9160 G2 As Base Station
Hosts
246
Psion Teklogix 9160 G2 Wireless Gateway User Manual
refer to the appropriate Psion Teklogix User Manual for: 9500 Network Controller,
SDK, TESS or ANSI.
No Online/Offline
If this parameter is Enabled, the 9160 G2 base station does not notify the host if the
status of a terminal changes between offline and online. If this parameter is Dis-
abled, the 9160 G2 does notify the host regarding any terminal status changes. The
default for this parameter is Disabled.
Monitor Poll
Hosts usually send messages or null polls to the 9160 G2 within a period of approx-
imately 40 seconds. If the parameter is enabled, the 9160 G2 base station monitors
messages and polls from this host; if it does not receive a message or poll within 40
seconds, it closes the connection. The default for this parameter is disabled.
First Terminal/Last Terminal
The values entered in these parameters designate the first and last terminals in the
range of terminals that will communicate with the host. These terminal numbers are
mapped to this particular host. Terminal numbers may range from 1 to 3840.