Filter
Top Products
Appendix C: Security Settings On Wireless Clients And RADIUS Server Setup
Configuring Static WEP Security On A Client
C-10
Psion Teklogix 9160 G2 Wireless Gateway User Manual
. . . then configure WEP security on each client as follows.
Network Authentication
Open
or
Shared
, depending on how you configured this option on the access point.
Note: When the Authentication Algorithm on the access point is set to Both,
clients set to either Shared or Open can associate with the AP. Clients con-
figured to use WEP in Shared mode must have a valid WEP key in order to
associate with the AP. Clients configured to use WEP as an Open system
can associate with the AP even without a valid WEP key (but a valid key will
be required to actually view and exchange data). For more information, see
Online Help on the access point.
Data Encryption
WEP
Network Key
Provide the
WEP key
you entered on the access point Security settings in the Transfer Key
Index position.
For example, if the Transfer Key Index on the access point is set to
1
, then for the client Net-
work Key specify the WEP Key you entered as
WEP Key 1
on the access point.
Key Index
Set key index to indicate which of the WEP keys specified on the access point Security page
will be used to transfer data from the client back to the access point.
For example, you can set this to
1, 2, 3,
or
4
if you have all four WEP keys configured on the
access point.
Table C.2 Association Settings
Choose
WEP
as the
Data Encryption mode
Enter
a network key
that matches
the WEP key on the access point
Choose
Open
or
Shared
in the position set to the transfer key index
(and re-type to confirm)
Optionally set a different transfer
key index
to send data from client back to access poi
nt
Disable
auto key option