Filter
Top Products
Psion Teklogix 9160 G2 Wireless Gateway User Manual 243
Chapter 22: The 9160 G2 As Base Station
Hosts
Notes: When enabling Automatic Terminal Number:
1. Direct TCP Connections for TekTerm must be disabled (see page
241).
2. The Auto Session parameter in the terminal must be enabled in order
for the terminal session number to be automatically assigned.
22.5 Hosts
When the 9160 G2 acts as a base station, it must communicate with a “host”—a
9500 Network Controller, or a host computer using a Psion Teklogix Software
Development Kit (SDK). Therefore each master network controller, SDK host, or
master base station that communicates with the 9160 G2 must be configured as a
host. The Hosts page of the Connectivity options shows the description of the host
chosen from the drop-down list (see Figure 22.8 on page 244).