Filter
Top Products
Psion Teklogix 9160 G2 Wireless Gateway User Manual 21
Chapter 2: Installation Requirements
Connecting To External Devices
2.2 Connecting To External Devices
This section contains general guidelines for connecting the 9160 G2 to external
devices such as network controllers, base stations, host computers, PCs, and video
display terminals.
2.2.1 Ports
Figure 2.2 shows the locations of the port and power connectors on the base of the
9160 G2. The port pinouts are described in Appendix B: “Port Pinouts And Cable
Diagrams”.
Figure 2.2 9160 G2 Port And LED Locations
2.2.2 LAN Installation: Overview
Because the 9160 G2 provides Ethernet connectivity, it can be added to an existing
LAN. Generally, LAN installations are handled with the help of the network admin-
istrators, as they are familiar with their network and its configuration. Once the 9160
G2 is installed, connected and powered on, the system administrator can access the
unit to check the configuration and to assign the 9160 G2 its unique IP address. This
may be done through the network (see “Changing The Configuration With A Web
Browser” on page 23). Subsequent changes in the network, such as the addition of
stations or users, would also require that the 9160 G2 configuration be changed.
Important: Once the 9160 G2 is configured and rebooted the first time, the
DHCP should be disabled unless the 9160 G2 obtains its IP
address from a server.
AC Power Socket
10BaseT/100BaseT Ethernet Adaptor
RS-232 Console Port
LED: 1 4 5 63
2
Operating Status
*
Note: Older versions of the 9160 G2 do not have a fiber port.