Filter
Top Products
Chapter 24: Backing Up & Restoring Configuration
Upgrading The Firmware
256
Psion Teklogix 9160 G2 Wireless Gateway User Manual
Note: You must do this for each access point; you cannot upgrade firmware auto-
matically across the cluster.
Keep in mind that a successful firmware upgrade restores the access point
configuration to the factory defaults. (See “Default Settings For The 9160
G2 Wireless Gateway” on page 27.)
To upgrade the firmware on a particular access point:
1. Navigate to Maintenance > Upgrade on the Administration Web pages
for that access point.
Information about the current firmware version is displayed and an option
to upgrade a new firmware image is provided.
2. If you know the path to the New Firmware Image file, enter it in the
New Firmware Image textbox. Otherwise, click the Browse button and
locate the firmware image file.
Note: The firmware upgrade file supplied must be in the format
<FileName>.upgrade.tar
Do not attempt to use <FileName>.bin files or files of other formats for
the upgrade—these will not work.