Filter
Top Products
Psion Teklogix 9160 G2 Wireless Gateway User Manual 37
Chapter 4: Quick Steps For Setup And Launch
Unpack The 9160 G2 Wireless Gateway
Setting up and deploying one or more 9160 G2 Wireless Gateways is in effect creat-
ing and launching a wireless network. The Basic Settings Administration Web page
simplifies this process. Here is a step-by-step guide to setting up your 9160 G2
Wireless Gateways and the resulting wireless network. Familiarize yourself with the
Chapter 3: “PreLaunch Checklist” if you haven’t already.
The topics covered here are:
• Step 1: Unpack The 9160 G2 Wireless Gateway.
• Step 2: Connect The Access Point To Network And Power.
• Step 3: Power On The Access Point.
• Step 5: Log On To The Administration Web Pages.
• Step 6: Configure ‘Basic Settings’ And Start The Wireless Network.
• What’s Next?
4.1 Unpack The 9160 G2 Wireless Gateway
Unpack the 9160 G2 Wireless Gateway and familiarize yourself with its hardware
ports, associated cables, and accessories.
4.1.1 9160 G2 Wireless Gateway Hardware And Ports
The 9160 G2 Wireless Gateway includes:
• Ethernet port for connection to the Local Area Network (LAN) via Ethernet
network cable.
• Power port and power adaptor.
• Power on/off switch.
• Either one or two radios depending on which model of the product
you have.