Filter
Top Products
Appendix C: Security Settings On Wireless Clients And RADIUS Server Setup
IEEE 802.1x Client Using EAP/TLS Certificate
C-18
Psion Teklogix 9160 G2 Wireless Gateway User Manual
1. Configure the following settings on the Association tab on the Network
Properties dialog.
2. Configure these settings on the Authentication tab.
3. Click Properties to bring up the Smart Card or other Certificate Prop-
erties dialog and enable the Validate server certificate option.
Click OK on all dialogs to close and save your changes.
4. To complete the client configuration you must now obtain a certificate
from the RADIUS server and install it on this client. For information on
how to do this see “Obtaining A TLS-EAP Certificate For A Client” on
page C-34.
Network Authentication
Open
Data Encryption
WEP
Note: An RC4 stream cipher is used to encrypt the frame body and cyclic redun-
dancy checking (CRC) of each IEEE 802.11 frame. This is the same
encryption algorithm as is used for Static WEP; therefore, the data encryp-
tion method configured on the client for this mode is WEP.
This key is provided for
me automatically
Enable
(click to check) this option.
Table C.7 Association Settings
Enable IEEE 802.1x authentication for this network
Enable
(click to check) this option.
EAP Type
Choose
Smart Card or other Certificate
.
Table C.8 Authentication Settings
Validate Server Certificate
Enable
this option (click to check the box).
Certificates In the certificate list shown, select the
certificate
for this client.
Table C.9 Smart Card Or Other Certificate Properties Settings