Filter
Top Products
Chapter 22: The 9160 G2 As Base Station
Connectivity Options: Base Station Mode
224
Psion Teklogix 9160 G2 Wireless Gateway User Manual
Operating Mode
This parameter allows you to set the operating mode of the 9160 G2 as Base Station
or RRM.
Auto-Startup
This parameter enables polling immediately when the 9160 G2 is rebooted.
If Auto-Startup is disabled, the 9160 G2 will wait until polling is initialized from
the network controller.
Shared Channel
Shared Channel is only used in Holland to accommodate government requirements.
When enabled, it imposes timing restrictions for polling. Every 2 seconds of polling
is followed by 0.5 seconds of silence—no polling occurs.
Further, if another carrier is detected on the channel, the 9160 G2 will cease radio
transmissions on that channel until the path is clear.