Filter
Top Products
Psion Teklogix 9160 G2 Wireless Gateway User Manual C-7
Appendix C: Security Settings On Wireless Clients And RADIUS Server Setup
Configuring A Client To Access An Unsecure Network (No Security)
Use this dialog for configuring all the different types of client security described in
the following sections. Make sure that the Wireless Network Properties dialog you
are working in pertains to the Network Name (SSID) for the network you want to
reach on the wireless client you are configuring.
C.4 Configuring A Client To Access An Unsecure Network
(No Security)
If the access point or wireless network to which you want to connect is configured
as “None”, that is no security, you need to configure the client accordingly. A client
using no security to connect is configured with Network Authentication Open to
that network and Data Encryption Disabled, as described below.
If you do have security configured on a client for properties of an unsecure network,
the security settings actually can prevent successful access to the network because
of the mismatch between client and access point security configurations.