3 – Event Messages
Alarm Events
3-2 59060-02 B
S
(A1003.000B) (Failing release of fabric lock held by switch with domain domain_ID)
Meaning: The local switch is locked as the result of zoning changes being
made by a remote switch.
Action: Wait for the lock to time out and try again.
(A1003.000C) (Fabric Busy, failing lock request from domain domain_ID)
Meaning: The command failed because the fabric is busy with another
command in progress.
Action: Retry the command in 10 seconds.
(A1003.000D) (Fabric already locked by domain domain_ID)
Meaning: The switch given by the domain_ID has locked the fabric.
Action: Unlock the domain_ID lock on the switch given by domain_ID.
(A1003.000E) (Couldn't acquire lock from domain domain_ID)
Meaning: Fabric may be changing, and therefor could not acquire the lock.
Action: Wait for the fabric to stabilize, then try again.
(A1003.0010) (Segmenting, zoneset zone_set_name not defined)
Meaning: In non-interop mode, there is a conflict in the zoning configuration,
causing the Inter-Switch Link (ISL) to isolate. The zone set is not
found within the local zoning data base while interop mode is
disabled.
Action: Contact your authorized maintenance provider.
(A1003.0011) (Segmenting, zoneset zone_set_name already active)
Meaning: In non-interop mode, there is a conflict in the zoning configuration,
causing the Inter-Switch Link (ISL) to isolate. A switch tried to
activate a zone set that is already active while interop mode is
disabled.
Action: Contact your authorized maintenance provider.
(A1003.0012) (Segmenting, zoneset zone_set_name merge conflict)
Meaning: In non-interop mode, there is a conflict in the zoning configuration,
causing the Inter-Switch Link (ISL) to isolate. After a zone merge
with interop mode disabled, two zone sets were discovered in the
local zoning database with the same name, but different
membership.
Action: Contact your authorized maintenance provider.