Q-Logic 59060-02 B Switch User Manual


 
3 – Event Messages
Alarm Events
3-10 59060-02 B
S
(A1003.0051) (Domain ID for local switch does not match fabric binding)
Meaning: The configured fabric binding value for the local switch world wide
name does not match the current domain ID for the switch.
Action: Change the fabric binding value for local switch world wide name
within the ISL group to the current value of the domain ID.
(A1003.0052) (ISL group does not contain entry for switch domain_ID)
Meaning: The ISL group does not contain an entry for each switch in the
fabric. Fabric binding requires an entry for each switch.
Action: Make sure there is an entry in the ISL group for each switch in the
fabric and retry activating the security set.
(A1003.0053) (Fabric binding must be unique, domains are assigned to multiple security
group members
Meaning: The configured fabric binding for the members of the ISL group are
not unique.
Action: Make the fabric binding settings unique for each member of the ISL
group or set them to 0 so that they are not enforced.
(A1003.0054) (Failure at remote switch)
Meaning: A frame was sent to a remote switch, but the expected response
was not received.
Action: Check the status of the remote switch.
(A1003.0055) (Problem on zoning save of following switches: domain_ID_list)
Meaning: A zoning save was not able to be performed on some remote
switches.
Action: Examine the named switches for obvious problems, otherwise
contact your authorized maintenance provider.
(A1003.0058) (Active ZoneSet zone_set no longer in database, please deactivate zoneset if
not already in progress or fabric will be inconsistent)
Meaning: Zone set with the same name as the current active zone set no
longer resides within the zoning database. The active zone set will
not be added to the full zone set sequence or else the fabric will
end up with an inconsistent zoning database.
Action: Deactivate the active zone set to keep the fabric consistent.
(A1003.0059) (Failing remote zoning configuration, zone member type not supported)
Meaning: Remote switch's zoning configuration contains zone member type
which is not supported.
Action: Edit the zone to remove the unsupported member type.