Filter
Top Products
3 – Event Messages
Alarm Events
59060-02 B 3-3
A
(A1003.0013) (Segmenting, zone zone_name merge conflict)
Meaning: In non-interop mode, there is a conflict in the zoning configuration,
causing the Inter-Switch Link (ISL) to isolate. After a zone merge
with interop mode disabled, two zone were discovered in the local
zoning database with the same name, but different membership.
Action: Contact your authorized maintenance provider.
(A1003.0014) (Segmenting, alias alias_name merge conflict)
Meaning: There is a conflict in the zoning configuration causing the
Inter-Switch Link (ISL) to isolate. Two aliases were discovered in
the local zoning database with the same name, but different
membership.
Action: Reconcile the active zone sets so that the two aliases have
identical membership.
(A1003.0015) (Zoneset Activation received from switch with domain domain_ID failed,
unknown zoneset zone_set_name)
Meaning: A zone set activation received from the named switch failed
because the zone set was not in the zoning database.
Action: Examine the named switch to verify that the zoning database is
correct.
(A1003.0016) (Releasing Lock held too long by domain_ID)
Meaning: Zone merge could not complete in the acceptable time.
Action: Check the status of the switch given by domain_ID.
(A1003.0017) (Activation of zoneset by management server failed due to port port_number
out of range.)
Meaning: A zone member defined by domain ID and port was received within
a management server AZSD command with a port number out of
range.
Action: Check management server application zoning configuration to
assure zone members are properly configured.
(A1003.001B) (Failing remote zoning configuration, total zoneset limit would be exceeded)
Meaning: The maximum number of zone sets has been exceeded on the
switch as a result of a zone merge.
Action: Reduce the number of zone sets on the remote switch.
(A1003.001C) (Failing remote zoning configuration, total member limit would be exceeded)
Meaning: The maximum number of zone members has been exceeded on
the switch due to a zone merge.
Action: Reduce the number of zone members on the remote switch.