Q-Logic 59060-02 B Switch User Manual


 
3 – Event Messages
Alarm Events
59060-02 B 3-25
A
(A1007.0020) (MAX Retry count reached on CHAP Authentication Protocol Reset, failing
Authentication)
Meaning: A RADIUS server has rejected a RADIUS authentication request.
Action: Check the configuration on both the switch and on the RADIUS
Server for incompatibilities.
(A1007.0021) (No response to RADIUS access request for device on port port)
Meaning: A configured RADIUS server did not respond to an authentication
request within the timeout period.
Action: Check RADIUS server configuration and the RADIUS server.
(A1007.0022) (Invalid response authenticator from RADIUS server IP_address:port, check
shared secret)
Meaning: RADIUS server configuration issue.
Action: Check the shared secret. The shared secret must be configured on
both the RADIUS server and the switch.
(A1007.0023) (Invalid response authenticator from RADIUS server IP_address:port, check
shared secret
Meaning: There is a RADIUS configuration problem.
Action: Confirm that the shared secret configured on the switch is identical
to the shared secret configured on the RADIUS server.
(A1007.0024) (Invalid access accept from RADIUS server IP_address:port, bad or missing
Service-Type)
Meaning: A service-type RADIUS attribute was not found within a RADIUS
packet.
Action: This is a RADIUS Server configuration issue. Consult your
RADIUS server documentation.
(A1007.0025) (Security feature not supported.)
Meaning: The switch is coming out of Non-Disruptive Code Load and
Activation (NDCLA) and had an active security prior to the NDCLA,
but the security feature is no longer supported.
Action: A license key may be required for the security feature.
(A1007.0026) (Unable to validate Chap Response from device_WWN, possible Chap secret
misconfiguration or security breach attempt.)
Meaning: A CHAP authentication attempt failed due to failure while
comparing secrets.
Action: Check security configuration.