Filter
Top Products
3 – Event Messages
Alarm Events
59060-02 B 3-23
A
(A1007.000C) (Security policy restrict mode, security db differs)
Meaning: The current security policy calls for restrict mode which means that
all switches in the fabric must have the same security databases or
the ISLs will not login. In this case, the security databases differ.
Action: Reconfigure the active security set so that the ISL group members
are the same.
(A1007.000D) (Security policy in mode mode, other switch in mode mode, sec db conflict)
Meaning: The security policy on the local switch differs from that of the
remote switch.
Action: Configure the security policy on the remote switch to match that of
the local switch.
(A1007.000E) (Security: Auth challenge received from WWN port_WWN, not Authorized to
join)
Meaning: A challenge authentication frame was received from a remote
switch, but the local switch does not have an entry for itself within
the active security set ISL group.
Action: Edit the ISL group to include the local switch.
(A1007.000F) (Security: Chap session Gen Response indicates error, chap unable to
authenticate)
Meaning: An Authentication Response frame cannot be built because the
CHAP session is not in the right state. The port will isolate.
Action: Check the remote device for a possible error condition. Reset the
port to retry again. If errors continue, disable CHAP for this device
if it belongs in the fabric.
(A1007.0010) (Security: Chap session Receive Challenge indicates bad state, chap unable
to authenticate)
Meaning: The CHAP session state is not in the correct state for a Challenge
message. Port will isolate.
Action: Check the remote device for a possible error condition. Reset the
port to retry again. If errors continue, disable CHAP for this device
if it belongs in the fabric.
(A1007.0011) (Chap failure, isolating with Invalid Attach)
Meaning: Frame does not match format for a CHAP status frame. Ports will
isolate.
Action: Check the remote device for a possible error condition. Reset the
port to retry again. If errors continue, disable CHAP for this device
if it belongs in the fabric.