Filter
Top Products
3 – Event Messages
Critical Events
3-34 59060-02 B
S
(C) (8400.0005) (Switch) (The switch is now performing a hotreset)
Meaning: Hot reset is in progress.
(C) (8400.0006) (Switch) (Admin mode for user user_name was canceled by user
user_name)
Meaning: Admin authority mode was canceled by another user interface
session that had the authority to do so.
(C) (8400.0008) (Switch) (The switch will be reset in several seconds
Meaning: The switch is being reset as a result of a command from a user
interface.
(C) (8400.0009) (Switch) (The switch will hardreset in several seconds)
Meaning: A hard reset of the switch is pending.
(C) (8400.000A) (Switch) (The switch will hotreset in several seconds)
Meaning: A hot reset is pending.
(C) (8400.000B) (Switch) (The switch will be shutdown several seconds)
Meaning: The switch will be shutdown several seconds.
(C) (8400.000C) (Switch) (Configuration is being restored - this could take several minutes)
Meaning: When a complete configuration restore is done on a switch, a
switch reset follows immediately to place the new configuration in
effect.
(C) (8400.000D) (Switch) (Attempted feature upgrade of features already installed)
Meaning: The feature is already installed.
(C) (8400.000E) (Switch) (Upgrading Licensed Ports to number_of_ports)
Meaning: The number of licensed ports on the switch has been upgraded.
(C) (8400.000F) (Switch) (Attempted Licensed Port upgrade of ports that are already
licensed)
Meaning: The switch has already been upgraded to the number of licensed
ports.
(C) (8400.0011) (Switch) (The switch will be reset in several seconds due to a config
restore)
Meaning: Switch management is processing a config restore command.
(C) (8400.0012) (Switch) (I/O blade in slot slot_number has been inserted into chassis)
Meaning: An I/O blade has been inserted into the chassis.