Filter
Top Products
3 – Event Messages
Alarm Events
3-8 59060-02 B
S
(A1003.003B) (Incomplete merge request sequence received, unable to process request.)
Meaning: A remote switch sent a merge request that was not understood.
Action: Check the remote switch for configuration errors or equipment
malfunction.
(A1003.003C) (Incompatible Zoning mode, Isolating link)
Meaning: The fabric contains switches with a mix of interoperability mode
settings.
Action: Configure all switches in the fabric to have the same value for
interoperability mode.
(A1003.003E) (Security: Ports downed for INVALID_ATTACH require administrative action
to be brought online.)
Meaning: When deactivating a security set, ports that were previously
downed due to security violations remain down.
Action: Reset the ports or place the ports online.
(A1003.003F) (ISL group empty and links up. Set ports offline to activate.)
Meaning: Attempt at activating fabric binding with an ISL group that has no
members is not allowed due because there are inter-switch links
(ISL) logged in to the switch.
Action: Configure all ISLs offline or add each ISL member with fabric
binding information to the ISL group before activating.
(A1003.0040) (Zone Member type member_type unsupported.)
Meaning: An invalid zone member type was discovered in a zone. ACL hard
zone membership must be defined by domain_ID and port number.
Action: Correct the member type.
(A1003.0041) (Zoning objects which contain Fibre Channel (FC) Address Members not
being sent to remote switch on save, not supported in this mode)
Meaning: An attempt was made to assign a zone member by FC address
while Interop mode was disabled. When Interop mode is disabled,
zone membership must be defined by world wide name or
domain_ID and port number.
Action: Enable Interop mode or change the zone membership type.