3 – Event Messages
Alarm Events
59060-02 B 3-11
A
(A1003.0060) (Zone Merge conflict (Alias mismatch for alias= alias, check members)
Meaning: The zone merge failed due to an alias mismatch.
Action: Examine the zoning configuration for conflicts.
(A1003.0062) (Failing delete orphans zoning request, fabric locked by switch with domain
ID domain_ID. Retry command later.)
Meaning: An attempt was made to delete the orphan zones while the fabric
was locked.
Action: Retry the command later.
(A1003.0063) (Failing delete orphans zoning request, fabric busy. Retry command later.)
Meaning: An attempt was made to delete the orphan zones while the fabric
was busy.
Action: Retry the command later.
(A1003.0064) (UFC failure received from domain domain_ID)
Meaning: Update Fabric Configuration (UFC) message was received with a
failed status from the switch given by domain_ID.
Action: Check the status of the switch at the given domain ID.
(A1004.0001) (Port in active hard zone, but not installed or present on this switch.)
Meaning: A zone member in an ACL zone on this switch is defined with an
invalid port number.
Action: Examine the fabric and correct the zone membership.
(A1004.0005) (No communication from neighbor switch on port port_number with domain
ID domain_ID, lost route)
Meaning: This switch has not received a hello from the remote switch for 80
seconds. Routes learned through this link are discarded.
Action: None.
(A1004.0008) (Eport Isolating due to ELP Incompatibility)
Meaning: An E_Port isolated due to an ELP (Exchange Link Parameter)
incompatibility.
Action: Review accompanying alarms for specific cause.
(A1004.0009) (Eport Isolating due to ESC Incompatibility)
Meaning: An E_Port isolated because the connecting switch failed to support
the standard routing protocol FSPF.
Action: Connect a compatible switch.