Filter
Top Products
3 – Event Messages
Alarm Events
3-20 59060-02 B
S
(A1005.003A) (Fabric Login (FLOGI) from address FC_address failed
authorization/authentication)
Meaning: Security authentication failed.
Action: Check security configuration on both the device and the switch to
ensure they are configured properly.
(A1005.003B) (Warning - Debug logging filter level is set)
Meaning: Debug logging has been set using the Set Log Level command.
Action: Confirm that you intended to do this. If not, use the Set Log Level
command to change the severity level to Info, Warn, or Critical.
(A1005.003C) (User Port(s) port_numbers, isolated, lost steering path, administering them
to state DOWNED.)
Meaning: The ports required for steering the user ports have failed.
Action: Contact your authorized maintenance provider.
(A1005.003E) (Warning, port(s) port_numbers configured ONLINE, but remain DOWN after
NDCLA.)
Meaning: Ports that were down before a non-disruptive code load and
activation remain down. This message serves as a reminder
because the alarm log is cleared during the non-disruptive code
load and activation.
Action: None.
(A1005.003F) (Badly formatted SML Notification Ack session session_ID string - string)
Meaning: The switch sent a notification which was not formatted correctly,
there may be a resource problem on the switch.
Action: If this is a recurring message, contact your authorized maintenance
provider.
(A1005.0040) (Unsupported SFP within port.)
Meaning: An unsupported SFP transceiver was installed in the port.
Action: Replace the SFP.
(A1005.0041) (Setting port admin state DOWN due to POST failure)
Meaning: The port failed the power-on self test and has been disabled.
Action: Contact your authorized maintenance provider.
(A1005.0042) (Target device port_address attached to port port_number with
IOStreamGuard Enabled)
Meaning: Target device attached to port with IO StreamGuard enabled.
Action: Disable I/O StreamGuard on the port.