Q-Logic 59060-02 B Switch User Manual


 
3 – Event Messages
Alarm Events
59060-02 B 3-27
A
(A1007.002D) (Ignoring RADIUS Server RADIUS_server, invalid UDP port configured)
Meaning: A RADIUS server was configured with invalid data for the UDP
port. This is a required configuration field for the RADIUS server to
be used.
Action: Set the UDP port value in the switch RADIUS server configuration
using the Set Setup Radius command.
(A1007.002E) (Ignoring RADIUS Server RADIUS_server, zero timeout configured)
Meaning: A RADIUS server was configured with invalid data for the timeout
value. This is a required configuration field for the RADIUS server
to be used.
Action: Set the timeout value in the switch RADIUS server configuration.
using the Set Setup Radius command.
(A1007.002F) (Ignoring RADIUS Server RADIUS_server, no shared secret is configured)
Meaning: A RADIUS server was configured with invalid data for the shared
secret. This is a required configuration field for the RADIUS server
to be used.
Action: Set the shared secret in the switch RADIUS server configuration.
using the Set Setup Radius command.
(A1007.0030) (Security protocol not using chap, unable to authenticate.)
Meaning: A CHAP Negotiate frame was received that specifies an
unsupported Dilfie Helmann (DH) Group type.
Action: Check the remote device for a possible error condition. Reset the
port to retry again. If errors continue, disable CHAP for this device
if it belongs in the fabric.
(A1007.0031) (Security protocol not using chap, unable to authenticate.)
Meaning: A CHAP Negotiate frame was received that specified an
unsupported hashing algorithm or an algorithm that is not allowed
for this security member's configuration.
Action: Check the remote device for a possible error condition. Reset the
port to retry again. If errors continue, disable CHAP for this device
if it belongs in the fabric.