3 – Event Messages
Alarm Events
3-18 59060-02 B
S
(A1005.0006) (Request from WWN device_WWN address FC_address, failed authentication,
verify MS security configuration)
Meaning: Management server authentication is enabled, and the received
frame failed authentication.
Action: None
(A1005.000A) (Cannot enforce zoning for member domain_ID, port_number, this zone
member will be ignored)
Meaning: A zone member given by domain ID and port number could not be
found in the fabric.
Action: Examine the fabric connections and zoning definitions.
(A1005.000C) (Configuration error, insufficient credit in pool. Extended credit not granted
for port port_number)
Meaning: Insufficient credits were available in the credit pool to grant the
credit request.
Action: Decrease the number of requested credits or add more donor
ports.
(A1005.000D) (Configuration error, insufficient credit in pool. Extended credit not granted
for port port_number)
Meaning: Insufficient credits were available in the credit pool to grant the
credit request.
Action: Decrease the number of requested credits or add more donor
ports.
(A1005.000E) (Configuration error, can't extend credit on loop capable ports. Extended
credit not granted for port: port_number)
Meaning: Loop ports cannot borrow credits from the credit pool.
Action: Change the port type to G_Port or F_Port.
(A1005.0013) (Hotswap procedure failed - must hardreset switch)
Meaning: The blade hot-swap procedure failed or the procedure was not
followed correctly.
Action: Perform a hard reset.
(A1005.0020) (Warning - development logging is enabled)
Meaning: Development logging is enabled.
Action: Contact your authorized maintenance provider.