Q-Logic 59060-02 B Switch User Manual


 
3 – Event Messages
Alarm Events
59060-02 B 3-21
A
(A1005.0045) (Configured port data conflicting within hardware capabilities)
Meaning: Configured port settings conflict with the hardware capabilities of
the port. The ports is downed.
Action: Reconfigure the port to be compatible with the port hardware.
(A1006.0004) (Zoning conflict, device_WWN is in an ACL hard zone, but device_WWN
share a soft zone)
Meaning: The named zone members cannot communicate because they are
members of different ACL hard zones.
Action: Place both zone members in the same ACL hard zone or exclude
both from ACL hard zones.
(A1006.0005) (Zoning enforcement error in Nameserver)
Meaning: An error occurred while checking ACL zoning.
Action: Contact your authorized maintenance provider.
(A1006.0006) (Zoning conflict, device_WWN and device_WWN do not share an ACL hard
zone, but device_WWN share a soft zone)
Meaning: The named zone members cannot communicate because they are
members of different ACL hard zones.
Action: Place both zone members in the same ACL hard zone or exclude
both from ACL hard zones.
(A1007.0001) (NS: Unspecified zoning enforcement error)
Meaning: A device was not authorized or it failed security checks and will not
be allowed to join the fabric.
Action: None.
(A1007.0002) (Security: WWN device_WWN not authorized to join))
Meaning: The device WWN is either not configured in the security data base,
or it is not configured for Challenge Handshake Authentication
Protocol (CHAP).
Action: Add the device WWN to the active security set if it missing, or
modify the group to allow for CHAP authentication with the other
devices.
(A1007.0005) (Security: Authentication request was rejected by port.)
Meaning: Indicates that a remove switch rejected a security authentication
attempt. The port will isolate.
Action: Checks the security configuration on the remote switch to
determine the problem.