Filter
Top Products
3 – Event Messages
Alarm Events
59060-02 B 3-15
A
(A1004.002F) (Request for Domain ID rejected, WorldWide Name (WWN) device_WWN not
allowed to join fabric.)
Meaning: The switch with the specified worldwide name is not allowed to join
the fabric.
Action: Add the switch to a group in the active security set.
(A1004.0030) (Topology change, lost route to switch with domain ID domain_ID)
Meaning: Connection was lost to a switch in the fabric.
Action: Inspect switch connections and device hardware for proper
operation. Review accompanying alarms for other causes.
(A1004.0032) (E_Port not supported on remote port. Reconfigure remote switch to
connect.)
Meaning: An E_Port isolated because the port on the remote switch could
not configure itself as an E_Port.
Action: Change the port type on the remote switch to G_Port or GL_Port.
(A1004.0033) (Remote switch is in Interop mode or using Legacy Address Format)
Meaning: A remote switch is attempting to connect with conflicting settings
for Interop mode or legacy address format.
Action: Configure the switches so that Interop mode and Legacy Address
Format settings are the same throughout the fabric.
(A1004.0034) (Failed to connect to a switch due to incompatibility - contact technical
support.)
Meaning: The two switches are incompatible. Possible causes include
incompatible interoperability mode configurations, incompatible
firmware versions, and incompatible licensing.
Action: Check interoperability mode settings, firmware versions, and
licensing on the remote switch. Otherwise, contact your authorized
maintenance provider.
(A1004.0035) (Failed to connect to a switch due to incompatibility - check interop
settings.)
Meaning: The remote switch failed to connect possibly because the
interoperability mode setting is different than that of the local
switch.
Action: Reconcile the interoperability mode settings on the local and
remote switch so that they are the same. Otherwise, contact your
authorized maintenance provider.