Filter
Top Products
3 – Event Messages
Alarm Events
59060-02 B 3-9
A
(A1003.0048) (Active Zone Set zone_name no longer in database, please deactivate zone
set if not already in progress (the save will be deferred until zone set no
longer active!)
Meaning: The switch will not allow you to delete a zone set from the zoning
database that has the same name as the active zone set.
Action: Deactivate the active zone set before deleting the zone set from
the zoning database that has the same name as the active zone
set.
(A1003.004C) (Active ZoneSet containing Fibre Channel Address may cause fabric to
segment due to switches that do not support this zone member type)
Meaning: Some switches in the fabric may not support Fibre Channel
address zone members in the active zone set.
Action: Edit the necessary zone sets to use WWN zone membership.
(A1003.004D) (Port group does not contain entry for this switch)
Meaning: The security set cannot be activated because the port group does
not have an entry for the local switch world wide name.
Action: Edit the port group to include the local switch world wide name.
(A1003.004E) (Group entry for local switch does not support authentication)
Meaning: The local switch world wide name group entry is not configured for
authentication, but other members within the group are. This
configuration is not allowed.
Action: Change the local switch world wide name entry run CHAP
authentication or remove CHAP authentication from other
members of the group.
(A1003.004F) (No Zone Merge Response)
Meaning: A merge request was sent out to all switches in the fabric but a
response was not received from at least one switch.
Action: Check other switches in fabric to determine why a response was
not sent.
(A1003.0050) (ISL group does not contain entry for this switch)
Meaning: The Inter-Switch Link (ISL) group does not contain an entry for the
local switch world wide name. This a required entry.
Action: Add the switch world wide name to the ISL group, then activate the
security set.