Ricoh 1050 All in One Printer User Manual


 
What to do if Something Goes Wrong
268
5
You cannot use Connect
Copy.
The sub-unit is busy copy-
ing or printing with anoth-
er function.
Press the [
Cancel
] key on
the master unit then stop
the sub-unit from copying/
printing.
The sub-unit is in Interrupt
mode.
Press the [
Cancel
] key on
the master unit. Then press
the
{
Interrupt
}
key on the
sub-unit to exit Interrupt
mode.
Reference
See
P.67
“Interrupt
Copy”
The sub-unit has been
switched off automatically
by the Weekly Timer func-
tion and is waiting for the
Key Operator Off Code to
be entered.
Press the [
Cancel
] key on
the master unit. Then on
the sub-unit enter the code
and press the
{
#
}
key.
Reference
See “Key Operator
Code For Off Setting” in
the System Settings
manual
The sub-unit is not in Copy
mode (i.e., Document Serv-
er mode).
Press the [
Cancel
] key on
the master unit. Then press
the
{
Copy
}
key on the sub-
unit to switch over to copy
mode.
The [
Connect
] key was
pressed simultaneously on
both the master unit and
sub-unit.
Press the [
Cancel
] key on
both the master unit and
sub-unit, then press the
[
Connect
] key on just one of
them.
M
indicator is lit on the
sub-unit.
Follow the instructions
shown on the display.
You cannot use Connect
Copy. The other machine is
in use.
The master unit is not in
Copy mode (i.e. Document
Server mode).
Press the [
Cancel
] key on
the master unit. Then press
the
{
Copy
}
key on the mas-
ter unit to switch over to
the copy function.
Machine Status Cause Action