Filter
Top Products
Key Operator Tools
333
6
Key Operator Tools
If the key operator code has been registered beforehand, you cannot access the
Key Operator Tools unless you enter the key operator code (up to 8 digits).
Menu Description
Check/Reset/Print Copy Counter
You can check or print the number of copies made under each user code.
Note
❒
You can also reset each user code counter to 0.
❒
If more than 20 user codes are registered, you can view all the counters using the
[
Previous
] or [
Next
] key.
Print Counter List You can print the number of copies under each user code.
To start printing, press the [
Print Counter List
] key. To stop
printing, touch the [
Cancel
] key.
Reset Counters You can reset each user code counter to 0.
Reset All Counters You can reset all counters to 0.
Program/Change/Delete User Code
You can register, change, or delete user codes (8 digits or less).
Note
❒
Up to 500 user codes can be registered.
❒
Even if you have changed a user code, the counter value will not be cleared.
❒
When the user code is deleted, the counter value will be automatically deleted.
Program You can register user codes.
A
Press the [
Program
] key.
B
Enter the User Code using the number keys.
C
Press the [
OK
] key.
Change You can change user codes.
A
Press the [
Change
] key.
B
Press the User Code you want to change.
C
Enter new User Code using the number keys.
D
Press the [
OK
] key.
Note
❒
The number of copies made under the old code is added
to that made under the new user code.