Filter
Top Products
265
5. What to do if Something
Goes Wrong
If Your Machine Does Not Operate as You
Want
General
Machine Status Problem/Cause Action
The machine instructs you
to wait.
The machine is warming
up.
Wait for the machine to
warm-up.
Reference
You can use Auto Start
mode during warm-up.
See
⇒
P.69
“Auto Start”
.
Copy paper is moving in
tray 1 (Tandem Tray).
Please wait until paper has
moved.
The machine cannot detect
the original size.
Improper original is set.
See
⇒
P.16
“Sizes Difficult to
Detect”
.
Set non-standard size orig-
inals on the exposure
glass.
Input the both horizontal
and vertical sizes of the
non-standard original. See
⇒
P.26
“Setting Originals
on the Exposure Glass”
.
Select paper manually. Do
not use Auto Paper Select.
Do not use Auto Reduce/
Enlarge.
Original is not set. Set your originals.
The machine instructs you
to check the original direc-
tion.
There is no copy paper that
is the same direction as the
originals.
Set the original in the same
direction as the copy pa-
per.
The machine instructs you
to check the paper size.
Improper original size is
set.
Select the proper paper
size.
Staple mode has been reset. The paper size was
changed during stapling.
You can only staple to-
gether pages of the same
size. Select copy paper of
the same size.