Filter
Top Products
Copying
68
2
To interrupt an original being fed
A Press the Interrupt key.
The Interrupt key lights up and scanning stops.
B Remove the originals that were being copied and set the originals you wish
to copy.
C Press the
{
Start
}
key.
The machine starts making your copies.
D When your copy job is finished, remove your originals and copies.
E Press the Interrupt key again.
The Interrupt key indicator goes out.
F When the display prompts you to, replace the originals that were being
copied before.
G Press the
{
Start
}
key.
The previous copy job settings will be restored and the machine will continue
copying from where it left off.
To interrupt copying after all originals have been fed
A Press the Interrupt key.
The Interrupt key lights.
Note
❒
Copying will not stop yet.
B Set your original.
C Press the
{
Start
}
key.
The machine stops the original job and starts copying your original.
D When copying is complete, remove your originals and copies.
E Press the Interrupt key again.
The Interrupt indicator goes out.
The previous copy job settings will be restored and the machine will continue
copying from where it left off.