Filter
Top Products
Basics
14
1
Starting the Machine
A Press the operation switch.
The On indicator lights and the display turns on.
Note
❒
If the machine does not start when the operation switch is pressed, make
sure the main power switch is on.
❒
The machine will take up to 360 seconds to warm up during which copying
is not possible. However, you can set up a job during this period with the
Auto Start function. See
⇒
P.69
“Auto Start”
.
❒
You can set up a copy job and press the
{
Start
}
key while the “Select copy
mode and press Start. Copying will start after warm up.” message is dis-
played.
❒
When “Enter user code, then press # key.” is displayed, enter your user
code. See
⇒
P.69
“User Codes”
.
Shutting Down the Machine
A Press the operation switch.
The On indicator goes out.
Turning Off the Main Power
A Press the Main Power switch.
The Main Power switch indicator goes out.
Note
❒
If you leave the Main Power switch off for more than 20 days, the date set-
ting might be wrong. For how to set the date, see “Timer Settings” in the
System Settings manual.