Filter
Top Products
Copying
70
2
Note
❒
To cancel Auto Start, press the
{
Stop
}
key.
❒
In Connect Copy mode, press the
{
Stop
}
key on the master unit to cancel
Auto Start.
Original Tone
The tone sounds and an error message is displayed when you leave your origi-
nal on the exposure glass after copying, and set your originals in the document
feeder after copying.
Note
❒
To stop the Original Tone, see “Original Tone”
⇒
P.318
“Display/Panel Tone”
.
Sample Copy
Use this feature to check a copy set before making a long copy run.
Limitation
❒
This function can be used only when the Sort function has been turned on.
Note
❒
This function is only available on the master unit in Connect Copy mode.
A Select Sort and any other functions, then enter the number of copies to be
made.
B Set the originals.
C Press the
{
Sample Copy
}
key.
One copy is delivered for proof copying.
D After checking the finish, press the
[
Print
]
key if the sample is acceptable.
The number of copies mode is the number you specified minus one for the
proof copy.
Note
❒
If you press
[
Stop
]
after checking change, return to step A to adjust the copy
settings as necessary. You can change some settings. e.g., staple, punch,
margin adjust settings