Ricoh 1050 All in One Printer User Manual


 
If You Cannot Make Copies As You Want
277
5
Adjust Image
Combine
Problem Cause Action
In Double Copies mode,
parts of the original image
are not copied.
The original and copy pa-
per do not match.
Select the proper original
and copy paper. See
P.144
“Double Copies”
.
In Centre/Border mode,
parts of the original image
are not copied.
You set too wide an erased
margin.
Make the margin narrower
with the User Tools. See
“Border Erase Width” and
“Centre Erase Width”
P.320
“Adjust Image”
.
Your original has narrow
margins on four sides.
In Margin Adjustment
mode, parts of the original
image are not copied.
You set too wide an erased
margin.
Set a narrower margin
with the User Tools. See
“Front Margin: Left/
Right” and “Back Margin:
Left/Right”
P.320
“Ad-
just Image”
.
In Image Repeat mode, the
original image is not copied
repeatedly.
You selected the same size
copy paper as originals,
and did not select the prop-
er reproduction ratio.
Select copy paper larger
than the originals.
Select the proper repro-
duction ratio.
Problem Cause Action
You cannot make a book
from a booklet or magazine
by folding copies.
Combine Original Booklet
Format or Combine Origi-
nal Magazine Format is not
correct.
Change the setting
P.90
“Combine”
.
Parts of the image are not
copied.
You specified an improper
reproduction ratio that
does not meet the sizes of
your originals and copy pa-
per.
When you specify a repro-
duction ratio using Manu-
al Paper Select mode,
make sure the ratio match-
es your originals and the
copy paper.
Note
Select the correct repro-
duction ratio before us-
ing Combine mode.
Your originals are not iden-
tical in size and direction.
Use originals that are iden-
tical in size and direction.