Filter
Top Products
What to do if Something Goes Wrong
304
5
e
Removing Jammed Staples
Important
❒
After removing jammed staples, always carry out step 10 and 11. If you do not
do this, the stapler cartridge could be damaged.
Note
❒
Staples might be jammed because of curled copies. In this case, try turning the
copy paper over in the tray. If there is no improvement, change to copy paper
with less curl.
❒
After removing jammed staples, staples might not be ejected the first few
times you try to use the stapler.
• 1: Open the front cover of the finisher.
• 2: Pull lever R8 and fully pull out the
staple unit.
• 3: Turn knob R9 until the marks are
aligned.
• 4: Turn knob R9 more and raise the sta-
ple unit towards you.
• 5: Pull out the staple unit lever.
• 6: Pull out the staple unit gently.