Filter
Top Products
Settings You Can Change with User Tools
109
5
❒ [With Image Rotation] Use to copy
when using the Auto Tray
Switching function.
❒ [Without Image Rotation] Only
copies with Auto Tray Switch-
ing if you load paper of the
same size and in the same orien-
tation in two or more trays. If
the paper is not the same size or
in the same orientation, copying
is interrupted and the message
“
Load paper.
” is displayed.
❒ [Off] When a paper tray runs out
of paper, copying is interrupted
and the message “
Load pa-
per.
” is displayed.
General Features P.
2
/
5
❖
❖❖
❖ Duplex Mode Priority
You can select the type of the Du-
plex function effective when the
power is turned on, or modes are
cleared.
Note
❒ Default:
• Metric version: 1 Sided
→
1 Sided
• Inch version: 1 Sided
→
2 Sided
❖
❖❖
❖ Copy Orientation in Duplex Mode
You can set the copy orientation
when making two-sided copies.
Note
❒ Default: Top to Top
❖
❖❖
❖ Original Orientation in Duplex Mode
You can set the original orientation
when making two-sided copies.
Note
❒ Default: Top to Top
❖
❖❖
❖ Change Initial Mode
You can select standard mode or
Program No.10 as the mode effec-
tive when power is turned on, or
modes are cleared.
Note
❒ Default: Standard
❖
❖❖
❖ Max. Copy Quantity
The maximum copy quantity can
be set between 1 and 100.
Note
❒ Default: 100 Sheet(s)
❖
❖❖
❖ Tone: Original remains
The beeper (key tone) sounds if
you forget to remove originals af-
ter copying.
Note
❒ Default: On
❒ If Panel Tone in User Tools (Sys-
tem Settings) is [Off], the beeper
does not sound, whatever the
Tone: Original remains setting.
See “Panel Tone” in “General
Features”, General Settings
Guide.
❖
❖❖
❖ Job End Call
You can choose to have the beeper
sound when copying is complete.
Note
❒ Default: On
❒ If Panel Tone of User Tools (Sys-
tem Settings) settings is [On], the
machine beeps to notify you
that it did not complete a job for
reasons such as: the paper tray
ran out of paper, or a paper jam
occurred.
ThemisC1_GB_Copy_F_FM.book Page 109 Wednesday, June 22, 2005 10:00 AM