Filter
Top Products
Copying from the Bypass Tray
23
2
B
BB
B
Insert the paper with the side you
want to copy facing down until
you hear the beep, and align the
paper guide to the paper size.
1: Extender
Important
❒ If the guides are not flush
against the copy paper, image
skewing or misfeeds might oc-
cur.
Note
❒ Do not stack paper over the lim-
it mark, if you do image skew-
ing or misfeeds might occur.
❒ When you load the OHP trans-
parencies, check the front and
back of the sheets, and place
them correctly, or a misfeed
might occur. Set the paper di-
rection to K and select A4K,
8
1
/
2
" × 11"K as paper size in
step
C
.
❒ Swing out the extender to sup-
port paper sizes larger than
A4L, 8
1
/
2
" × 11"L.
❒ Fan paper to get air between the
sheets and avoid multi-sheet
feeds.
❒ When copying onto envelopes:
⇒ p.26 “When copying onto en-
velopes”.
C
CC
C
Select the paper type and size.
Note
❒ When copying onto OHP trans-
parencies or thick paper, see
p.24 “When copying onto OHP
Transparencies or Thick Paper”.
❒ When copying on the back side
of paper, see p.25 “When Copy-
ing on the Back Side of the Pa-
per”.
When copying onto standard size
paper
A Press the {
{{
{#}
}}
} key.
B Press [Select Size].
C Select the paper size.
D Press [OK] twice.
When copying onto custom size
paper
A Press the {
{{
{#}
}}
} key.
B Press [Custom Size].
C Enter the vertical size of the pa-
per using the number keys,
and then press [#].
ZGHS005e
ThemisC1_GB_Copy_F_FM.book Page 23 Wednesday, June 22, 2005 10:00 AM