Filter
Top Products
Specifications
130
6
❖
❖❖
❖ Series Copies
• The machine sets the reproduction ratio automatically to meet the paper
size and copies the originals together onto the paper.
• The reproduction ratios you can specify are 25–400%.
• If the calculated ratio is under the minimum ratio, it is automatically ad-
justed to within acceptable range. However, with some ratios, parts of the
image might not be copied.
• If the orientation of originals is different from that of the copy paper, the
machine will automatically rotate the image by 90° to make copies proper-
ly.
• You cannot copy with originals different in size and orientation.
• If the number of originals scanned is less than a multiple of 4, the last page
is copied blank.
• In Magazine or Booklet mode, the copying may take some time after scan-
ning originals.
• When the 1000-Sheet finisher is installed, if you select Saddle Stitch func-
tion in Magazine or Booklet mode, the machine staples and folds the paper
in the centre, then delivers the paper folded.
❖
❖❖
❖ Image Repeat
Depending on the paper size, ratio, and orientation, parts of repeated images
may not be copied.
❖
❖❖
❖ Centring
Though the original is set to a different orientation from the paper loaded, the
machine will not rotate the image by 90° (Rotate copy).
❖
❖❖
❖ Erase
The width of the erased margin varies depending on the reproduction ratio.
If the size of the original is different from sizes listed in the following chart,
the erased margin might be shifted:
• Metric version
• Inch version
Where original is placed Paper size and orientation
Exposure glass
A3
L
, B4 JIS
L
, A4
KL
, B5 JIS
KL
, 8
1
/
2
"
×
13"
L
ADF A3
L
, B4 JIS
L
, A4
KL
, B5 JIS
KL
, A5
KL
,
8
1
/
2
"
×
13"
L
Where original is placed Paper size and orientation
Exposure glass
11"
×
17"
L
, 8
1
/
2
"
×
14"
L
, 8
1
/
2
"
×
11"
KL
ADF
11"
×
17"
L
, 8
1
/
2
"
×
14"
L
, 8
1
/
2
"
×
11"
KL
,
10"
×
14"
L
, 5
1
/
2
"
×
8
1
/
2
"
KL
ThemisC1_GB_Copy_F_FM.book Page 130 Wednesday, June 22, 2005 10:00 AM