Filter
Top Products
Using the Operation Panel
94
6
Job Control Menu
There are 5 menus in the “Job Control” Menu.
• Paper Input
•Output Tray
• Print Quality
•System
• PCL Menu
Job Control Parameters
❖
Paper Input
1
/
3
Menu Description
Tray Priority You can specify the default tray. The tray selection speci-
fied with the printer driver overrides the one specified here.
In DOS printing, the tray specified here is used, when no
tray is specified for a print job.
Tray1, Tray2, Tray3, Tray4
Note
❒
Default: Tray1
❒
Only the installed trays appear on the panel display.
❒
It is recommended that you load paper having the size
and direction you frequently use in the tray selected
with the "Tray Priority".
Tray Locking If you use several different kinds of paper, you can lock a
tray to prevent printing on wrong paper. If you want to se-
lect a locked tray, specify the paper tray using the printer
driver.
None, Tray1, Tray2, Tray3, Tray4
Note
❒
Default: None
❒
Only the installed trays appear on the panel display.
❒
You cannot lock multiple trays at once.
❒
When a locked tray is specified using the printer driver,
the printer does not search for any other tray.