Filter
Top Products
Paper and Other Media
44
4
Loading Thick Paper,
Envelope or OHP
Transparencies
You can load thick paper, envelope or
OHP transparencies onto the tray 2.
When thick paper or OHP transpar-
encies are loaded, switch the lever in-
side of the paper tray.
Reference
For more information on loading
paper, see P.27 “Paper and Other
Media”.
Important
❒
When you set thick paper in tray 2,
do not stack paper above the lower
limit mark (
A
) of tray 2.
A
Change the lever on the paper
size dial of the tray 2 to the "Thick
paper” mode.
Limitation
❒
If the “Thick paper” mode is se-
lected, the function for using the
tray 2 is not available.
• Duplex print
• Sort, Shift Sort
•Staple
• Limitless paper feed
•Proof Print
The yellow line appears under the
paper size indication on the front
of the paper tray.
Note
❒
Return the lever to the left side,
after you finished printing on
thick paper.
Loading Paper on PS420
(Paper Feed Unit)
This section describes instructions to
load paper in the optional paper feed
unit PS420. You can load A4 long-
edge feed (Metric version) or 8
1
/
2
" ×
11" long-edge feed (Inch version) size
onto PS420.
Note
❒
Load the paper that is the same
size on the right and left sides of
the paper feed unit.
A
Slide the paper tray out until it
stops.
ZAEY052E
ZAEH260E
ZAEY200E