Filter
Top Products
Using the Operation Panel
98
6
❖
System
1
/
2
Menu Description
Print PS Errors You can specify whether the PS error sheet should be printed.
•Off
•On
Note
❒
Default: Off
I/O Timeout You can specify how many seconds the printer should wait
before ending a print job. If data from other ports often ap-
pear in the middle of your print job, you should increase
the timeout value.
15 seconds, 30 seconds, 60 seconds, 180 seconds, 300 seconds
Note
❒
Default: 30 seconds
Energy Saver 1 You can specify the length of time the printer should wait
before switching to Energy Saver mode level 1. This Energy
Saver mode reduces electric power consumption.
Off, 1 minute, 3 minutes, 5 minutes, 10 minutes
Note
❒
Default: 10 minutes
❒
If there is an error in your printer, the printer will not
switch to Energy Saver mode level 1. Power Consump-
tion is reduced by about 40% compared to the stand by
mode.
❒
When the printer switches to Energy Saver mode level 1,
the
Power
indicator turns off, the
On Line
indicator
stays on, and "Energy Saver 1" is displayed on the panel
display.
Energy Saver 2 You can specify the time the printer should wait before
switching to Energy Saver mode level 2. This Energy Saver
mode reduces electric power consumption.
Off, 15 minutes, 30 minutes, 1 hour, 2 hours, 3 hours
Note
❒
Default: 15 minutes
❒
If there is an error in your printer, the printer will not
switch to Energy Saver mode level 2. Power Consump-
tion is reduced by about 60% compared to the stand by
mode.
❒
When the printer switches to Energy Saver mode level 2,
the
Power
indicator turns off, the
On Line
indicator
stays on, and "Energy Saver 1" is displayed on the panel
display.