Filter
Top Products
Loading Paper and Other Media
41
4
Loading Paper and Other Media
Loading Paper in the Paper
Tray
This section describes instructions for
loading paper whose size and feed di-
rection is already set in the standard
paper tray and the optional PS400 or
PS440. If you want to change the pa-
per size or feed direction, see P.42
“Changing Paper Size of the Paper
Tray”.
If you want to load paper in PS420,
see P.44 “Loading Paper on PS420 (Pa-
per Feed Unit)”. If you want to load pa-
per in Bypass Tray Type 270, see P.45
“Loading Paper in Bypass Tray Type
270”.
Important
❒
Confirm that the setting of the pa-
per size dial matches the paper size
and feed direction of the paper in
the tray. Otherwise, the paper mis-
feed or unexpected result might
occur.
Reference
For more information on the size
and feed direction of paper that
can be loaded in the tray, see P.27
“Paper Types and Sizes”.
A
Slide the paper tray out until it
stops.
B
Align all four sides of the paper
stack, and load it into the tray.
Important
❒
Do not stack paper over the lim-
it mark.
❒
When you set custom size or
thick paper in tray 2, do not
stack paper above the lower
limit mark of tray 2.
Note
❒
Set the paper after shuffling
through the sheets.
❒
Load paper face up onto the
tray.
C
Slide the tray into the printer un-
til it stops.
ZAEY012E
ZAEY030E