Filter
Top Products
Error & Status Messages on the Operation Panel
57
5
Getting Printer Information over the Network
Printer Current Status
You can check the printer's current status using "Telnet (mshell)".
❖
mshell
Use status command.
Reference
For more information, see “Remote Maintenance by Telnet (mshell)” in the
Operating Instructions of the optional network interface board.
Messages Description Resolution
Add Staples The stapler is empty. Replace the staple refill
with new one.
⇒
P.75
“Adding Staples”
Add Toner The printer is out of toner. Replace a new toner bottle.
Call Service Power Off On The Service Code or SC
number identifies the fail-
ure.
Contact your sales or ser-
vice representative.
Call Service SC_XXX The Service Code or SC
number identifies the fail-
ure.
Turn the printer power off
and on. If the message ap-
pears again, contact your
sales or service representa-
tive.
Close Bridge Unit Cover The cover of Bridge Unit
Type 270 is open.
Close the cover of Bridge
Unit Type 270.
Close Finisher Cover The cover of SR720 (finish-
er) is open.
Close the cover of SR720
(finisher).
Close Front Cover The front cover is open. Close the front cover of the
printer.
Close Mailbox Cover The cover of CS370 (4-bin
Mailbox) is open.
Close the cover of CS370 (4-
bin Mailbox) cover.
Close Right Cover The right cover of the print-
er is open.
Close the right cover of the
printer.
Close R-Cover at Paper
Tray
Lower right cover 1 or 2 is
open.
Close lower right cover 1 or
2.
Close Upper Right Cover The upper right cover is
open.
Close the upper right cover.
Close Interchange Unit
Cover
The Interchange Unit Type
280 cover is open.
Close the interchange unit
cover.