Filter
Top Products
Loading Paper and Other Media
43
4
❒
When you set thick paper in tray
2, do not stack paper above the
lower limit mark (
A
) of tray 2.
Note
❒
Shuffle the paper before setting
in the tray.
❒
Load paper face up onto the
tray.
F
Align the side guide for the load-
ed paper size (
B
) by opening the
release lever of the side guide
(
A
).
G
Set paper guide lock to the
“locked” position.
H
Align the rear guide for the load-
ed paper size slightly by pushing
the releasing lever of the rear
guide.
I
Adjust the paper size dial for
loaded paper size.
Important
❒
Confirm that the setting of the
paper size dial matches the pa-
per size and feed direction of
the paper in the tray. Otherwise,
the paper misfeed or unexpect-
ed printing result might occur.
❒
Confirm that the paper size dial
matches the actual paper size
loaded in the tray. If the actual
paper size is not shown on the
dial, set the dial to "
p
" and
specify the paper size using the
operation panel. For more infor-
mation on specifying the paper
size, see P.27 “Paper Types and
Sizes”.
J
Slide the tray into the printer un-
til it stops.
ZAEY052E
ZAEY031E
ZAEY032E
ZAEY033E
ZAEY050E